Power Transducer Table

TYPE	MODEL	INPUT	OUTPUT	AUX POWER
AC Voltage	TDV	A. 0~150VAC B. 0~300VAC C. 0~600VAC	A. 0~10mA DC B. 0~20mA DC C. 4~20mA DC D. 0~5V DC E. 1~5V DC F. 0~10V DC Y. Other	A. 110/220V AC B. 24V DC C. 110V DC D. 125V DC E. Self Power
	TDV3
AC Current	TDA	A. 0~1A AC B. 0~5A AC C. 0~10A AC
	TDA3
Watt	TDW	A. 1 • 2W B. 3 • 3W C. 3 • 4W D. Other
Var	TDQ
Watt/Var	TDWQ	A. 110V B. 220V Y. Other
Power Factor	TDPF
Watthour	TDWH		A. 1Pulse/1WH B.10Pulse/1WH
Varhour	TDQH	A. 1A B. 5A
Watt/Watthour	TDWWH	A. 50Hz B. 60Hz
Var/Varhour	TDQQH
Frequency	TDF	30~600V AC 50 or 60 Hz	Same as V, A, W, Var, PF

Power Transducer Specifications

Input Burden				: 0.1VA/60Hz at 150V AC; Self-Power Mode   2VA at 150V AC.
Input Range				: Normal Voltage 110V, Effective Range   85~150V.   Normal Voltage 220V, Effective   Range   160~300V.   Normal Current 5A, Effective Range 0~7.5A.   Normal Current 1A, Effective Range 0~1.5A.
Input Over				: Normal AC 110V, Voltage Over 500V   Continuous. Self-Power   Mode 150V AC Maximum.   Normal AC 5A. Current Over 15A   Continuous; 50A 10 Sec/Hour; 400A 0.5   Sec/Hour.
Output Load				: DC Current Mode : 10VDC Maximum, DC   Voltage Mode :   10mA Maximum.
Output of WH or VarH				: Open Collect Type, Effective Range   5~30V DC, 5~100mA.
Output Protection				: Without Damage for Output Open or Short   Circuit.
Dielectric Strength				: 2.6KV AC / Min between Input/Output/Power/Case.
Impulse				: 4KV 1.2x50 uS. ANSI C37.90a/1983. DIN IEC 255 4.
Common Mode Rejection				: 120db, 50/60 Hz.
Stability				: 0.2%/Year.
Calibration				: SPAN and ZERO ±10%.
Response Time				: 400mS, 0 ~ 99%.
Ripple				: 0.5%rms Max.
Magnetic Effect				: DIN - IEE688 0.05% Change 10" Center   100A Turn.
Temperature Coefficientt				: 100ppm /°C          From 0~60°C
Operation Condition				: 10°C ~ + 65°C 20 ~ 95% RH Non-Condensed.
Storage Condition				: -40°C ~ + 75°C 20 ~ 95% RH Non-Condensed.
Power Supply				: Dual Power 110/220V AC or DC ±20%,   50/60Hz.
Aux. Power Effect				: 0.01% / V
Housing material				: ABS Plastic, Self-Extinguishing to UL   Subject 94 Class V-O.
Mounting				: DIN Rail or Wall Mounting.

Microprcessor Digital Meter Table

TYPE	MODEL	LED DISPLAY DIGITS	OUTPUT	AUX POWER
AC Voltage	DMV	4 1/2 Digits = 19999 Counts Programmable	A. 0~10mADC B. 0~20mADC C. 4~20mADC D. 0~5V DC E. 1~5V DC F. RS-485 Y. Other	A.110/220V     AC B. 24V DC C. 110VDC D. 125V/DC
AC Current	DMA
Watt	DMW
Var	DMQ
Watthour	DMWH	Watt, Var, DC Watt, Watt Demand: 4 1/2 Digits - 19999 Counts Programmable Wathour, Varhour, DC Watthour, Flow : 7 Digits = 9999999 Counts	A.1Pulse/1WH B.10Pulse/1WH
Varhour	DMQH
Watt/Watthour	DMWWH
Var/Varhour	DMQQH		RS-485
Watt Demand/WH	DMM		A.1Pulse/1WH B.10Pulse/1WH
DC Watt/Watthour	DMDWWH
Flow	DML
Power Factor	DMPF	-0.500~1.000~+0.500	A. 0~10mADC B. 0~20mADC C. 4~20mADC D. 0~5V DC E. 1~5V DC F. RS-485 Y. Other
Frequency	DMF	4 1/2 Digits + 19999 Counts
DC Rate	DME
Current Loop (2 Wire)	DMS
DC Voltage, Current	DMD
RTD Temperature	DMR
T/C Temperature	DMT
Load Cell	DMB
RPM	DMU
Potentiometer	DMP
RS-485	DMG		NONE
DC Current Stimulating	DMX		4~20mA ADJ.

Microprocessor Digital Meter Specifications

Input Burden				: Voltage 0.2VA at 120V, Current 0.3VA at 5A   60Hz.
Input Overload				: 3 Rated Continuous at 120V AC.   3 Rated Continuous at 5A AC.   50 Rated 1 Sec., 80 Rated 0.5 Sec.
Dielectric Strength				: AC 2.6KV/Min., Input/Power/Case. DIN IEC 688.
Stability				: Long Term Draft 0.2%/year.
Temperature Coefficient				: 100ppm /°C From 0~60°C.
Response Time				: 1 Sec.
Analog Output Load				: Isolate Type. DC Current Mode : 7V DC Max., DC Voltage Mode : 5mA DC Max.   Output Range User Selectable.
Digital Output Load				: Dual Setting & Contact Points, Setting Function User   Selectable.
Setting Function				: Isolate Type, RS-485 Output, 1200, 2400, 4800, 9600,   19200 Baud Rate User Selectable
Setting Range				: ±19999 Counts User Selectable.
Dead Band				: 0 ~ 9999 Counts User Selectable.
Time Delay				: 0 ~ 99 Sec, Counts User Selectable.
SPDT Capacity				: AC 120V 5A, 250V 3A, DC 24V 3A.
Stability				: 0.2%/Year.
Operating Condition				: - 10°C ~ +55°C 20 ~ 95% RH Non-Condensed.
Storage Condition				: - 40°C ~ +75°C 20 ~ 95% RH Non-Condensed.
Power Supply				: Dual Power 110/220V AC or DC ±20%, 50 /   60Hz.
Outline Dimension				: 1/8 DIN 96W x 48H x 135D mm.
Mounting				: Panel Flush Mounting.

Industrial Transmitter Table

TYPE	MODEL	INPUT	OUTPUT	AUX POWER
DC Isolating	TMD	1. 0~10mADC 2. 0~20mADC 3. 4~20mADC 4. 0~5VDC 5. 1~5VDC 6. 0~10VDC 7. Other	1. 0~10mADC 2. 0~20mADC 3. 4~20mADC 4. 0~5V DC 5. 1~5V DC 6. 0~10V DC 7. Other	1. 110V AC 2. 220V AC 3. 24V DC 4. 110V DC 5. 125V DC
	TMD2
	TMD3
	TMD4
RTD Temperature	TMR	1. PT1000 2. CU10
RTD Temperature	TMR2
RTD Temperature	TMR3
T/C Temperature	TMT	K,E,J,T,R,S,B
Load Cell	TMB	Various mV DC
Frequency to DC	TMF	Open Collect etc.
DC to Frequency	TMG	Same as TMD	Various Hz
DC Power Supply	TMX	110 or 220V AC	6V; 12V; 24V DC
Current Loop (2 Wire)	TMS	4~20mA DC	Same as TMD
	TMS2
	TMS3

Specifications Industrial Transmitter

Input Impedance				: Voltage Input 1M , Current Input  50
Insulation Resistance				: 100M / 500V DC.
Output Strength				: DC Current Mode : 10VDC Maximum, DC   Voltage Mode :   10mA Maximum.
Dielectric Strength				: AC 1500V / Min. between Input / Output /   Power.
Maximun Input Over				: 2V DC Range 300V rms Continuous.   2V DC Range 150V    rms Continuous.   20mA DC Range 150mA Continuous.
Linearty & Repeatability				: 0.1% Typical.
Common Mode Rejection				: 120db DC to 60Hz.
Stability				: 0.2%/Year.
Adjustments				: SPAN and ZERO ± 10% Minimum.
Response Time				: 400mS.
Ripple				: 0.1% rms RO.
Temperature Coefficient				: 100ppm / °C From 0~60°C;    50ppm /25°C ±5°C.
Operating Storage				: - 5°C ~ + 55°C 20 ~ 95% RH Non-Condensed.
Storage Condition				: - 10°C ~ + 70°C 20 ~ 95% RH Non-Condensed.
Power Supply				: AC or DC ± 20%.
Aux. Power Effect				: 0.03% / V.
Mounting				: DIN Rail or Wall Mounting.