Advantech


Advantech



SALE $$$

 
MIC Series

 
 
MIC-2718

16 Ch. Analog Input Module
    Main Features:
  • 12-bit A/D, 100 kHz.
  • 16 S.E. or 8 differential inputs.
  • Plug-in terminal block included.
Sale Price : US$ 305
 
MIC-2730

16 Ch. Digital Input Module
    Main Features:
  • 16 channel DI
  • 2500 VDC isolation protection
  • Plug-in terminal block included

Sale Price : US$ 150
 
 
MIC-2750

16 Ch. Digital Output Module
    Main Features:
  • 16 channel DO
  • 2500 VDC isolation protection
  • Plug-in terminal block included
Sale Price : US$ 150
MIC-2120

Floppy Disk Drive Module
    Main Features:
  • On-board 1.44 MB FDD.
  • Built-in FDD interface.
Sale Price : US$ 145
MIC-2130


Floppy Disk Drive Module
    Main Features:

  • Built-in Enhanced IDE interface
  • Supports 2 1/2 HDD
Sale Price : US$ 65




PCM Series

PCM-5860 BARE

AIO PENTIUM SBC WITH SVGA/LCD AND ETHERNET INTERFACE AND PCI EXPANSION SLOT, W/O CPU

The PCM-5860 is an all-in-one single board Pentium computer with an on-board PCI LCD/SVGA controller, a PCI Ethernet interface and a PCI expansion slot. Equipped with 64-bits and local bus architecture, the PCM-5860 can release Pentium's full potential and provide unprecedented performance compared to current 32-bit processor boards. The PCM-5860 offers all the functions of an industrial computer on a single boards, but fits in the space of a 5.25" floppy drive (only 5.75" x 8"). For maximum performance, the PCM-5860 also supports 2nd level cache sized from 256 KB to 512 KB. On-board features include two serial ports (RS-232 and RS-232/422/485), one multi-mode parallel (ECP/EPP/SPP) port, a floppy drive controller and a keyboard or PS/2 mouse interface. The built-in high speed PCI IDE controller supports both PIO and bus master modes. Up to two IDE devices can be connected, including large hard disks, CD-ROM drives, tape backup drives and other IDE devices. The PCM-5860 also features power management to minimize power consumption. It complies with the "Green Function" standard and supports three types of power saving features: Doze mode, Standby mode and Suspend mode. In addition the board's watchdog timer can automatically reset the system or generate an interrupt in case the system stops due to a program bug or EMI.
 
    Features:
  • Accepts Intel Pentium 75-166 MHz CPUs
  • 2nd level cache: supports both asynchronous SRAM and Pipeline burst RAM module, up to 512 KB cache memory
  • 32-bit PCI-bus SVGA/LCD controller, supports True-color and Hi-color display capability
  • 32-bit PCI-bus Ethernet interface, Novell NE 2000 compatible
  • Built-in, bus-master PCI IDE controller supports two IDE devices (large hard disk, CD-ROM, backup, etc.)
  • One PCI expansion slot
  • Supports both normal and EDO type DRAM, from 2 MB to 64 MB of DRAM
  • One enhanced multi-mode SPP/EPP/ECP parallel port, two serial posts: one RS-232 and one RS-232/RS-422/RS-485 selectable
  • Watchdog timer, time interval 1.6 seconds
  • Green Function: supports doze/standby/suspend modes
  • ISA-bus expansion with PC/104 module

Sale Price : US$ 435
PCM-3610

ISOLATED DUAL PORTS RS-232 AND RS422/RS485

The PCM-3610 isolated dual port RS-232 and RS-422/485 interface module supports all popular serial communication protocols and provides reliable high-speed communication over long distances (up to 4000 ft/1.2 km).
    Features:
  • Compact size: 90 mm x 96 mm (3.6" x 3.8" x 0.6")
  • Two ports with dual 10-pin connectors:
  • Port 1: RS-232 or RS-422/RS-485
  • Port 2: RS-422/RS-485
  • 16C550 UART with 16-byte FIFO
  • Speeds from 50 to 56,000 bps
  • Distances up to 4000 ft/1.2 km
  • I/O address and interrupt selectable
  • 500 VDC isolation
  • Automatic RS-485 data flow control
  • Data flow indicator for troubleshooting
  • Surge protection on Tx/Rx lines
  • Power consumption: +5 V @ 400 mA typical, +5 V @ 950 mA maximum


Sale Price : US$ 185
PCM-3640

4 PORTS RS-232 MODULE

The PCM-3640 4-port RS-232 interface module supports full duplex serial communications and provides reliable high speed data transfers under multitasking environments.
    Features:
  • Compact size: 90 mm x 96 mm (3.6" x 3.8" x 0.6")
  • Four RS-232 ports with 10-pin connectors
  • 16C550 UARTs with 16-byte FIFO
  • Speeds up to 115.2 Kbps
  • Choose address COM1 to COM4 or other user definable I/O address
  • Individually selectable IRQ for each port (IRQ 3, 4, 5, 6, 7, 9, 10, 11, 12, or 15)
  • Full RS-232 interface support (TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND)
  • Power consumption: +5 V @ 220 mA (typical)


Sale Price : US$ 120
PCM-3724

48 Ch. Digital I/O Module
    Features:
  • 48 digital I/O channels
  • Channels simulate 8255 PPI mode
  • Interrupt triggering, rising/falling edge


Sale Price : US$ 125
PCM-3718

30 KHz A/D Module
    Features:
  • 16 S.E. or 8 diff. Analog Inputs
  • Programmable gain on all analog inputs
  • 12 bit, 33 micro sec conversion time
  • Two 8-bit digital ports, configurable as DI or DO
  • Single +5V Operation

Sale Price : US$ 240







FPM Series

FPM30CT

Industrial 10.4" Flat Panel Monitor

The FPM-30 series are flat panel monitors with 10.4" color TFT/DSTN LCDs. Being less than 2" in depth, the FPM-30 saves space and is light enough to fit almost anywhere. Equipped with an optional touchscreen, the FPM-30 can even be used as a remote display or controller for applications. Each model comes with a 1.8 m cable, optional 4.5 m and 10 m cables are available for extended display needs.
    Features
  • Front panel: aluminium panel meets NEMA4/IP 65
  • Mounting: Panel or wall mount
  • Dimensions (W x H x D): 330 x 242 x 50 mm (13" x 9.5" x 2")
  • Gross Weight: 5.4 kg (12 lbs)
  • Display Interface: TTL
  • Display Card: PCA-6653, ISA Bus
  • Touchscreen (optional): Analog resistive type

Sale Price : US$ 1,280